Steelpaint coatings cure and protect right away, even under the most unusual circumstances:

• In marine environments and relative air humidity up to 98%.
• Unflagging resistance to a number of acids, chemicals, oils, fats and alkalines.
• Reliable application from -10°C up to +50°C.
• Long-life corrosion protection under the toughest conditions.
• Tried-and-tested compatibility with cathodic protection systems (certified by the Federal Waterways Engineering and Research Institute (BAW) Karlsruhe, Germany).

No need to waste precious time on corrosion protection – just cure quickly and simply with SP-MCPU. Slash down-times and get the job done in a flash. Plus: reap the benefits of an intelligent combination of elasticity and hardness, minimizing transport and assembly damage to precoated parts. The advantages speak for themselves:

• Single component – for easy application and an end to mixing problems.
• Cures and penetrates quickly – for recoats in quick succession.
• Even when still wet, coatings are immediately environment-safe – resistance, for instance, to salt water.
• Superior adhesion to stubborn rust film, mechanically prepared steel surfaces and tenacious previous coats.

• 2 component – potential mixing errors
• Application depends on weather conditions and ambient temperatures
• No application in relative air humidity above 85%
• Tidal zones: generally only thick coats possible, without zinc primer. Danger of blistering
• Application to damp surfaces is not possible
• Dew point must be taken into account
• Reaction time only after components are mixed. Application time can be very limited – especially in extremely high temperatures
• Pot-life

• Only 1 component – so no mixing errors
• No-headache application in all environments, all year long – no matter the weather
• Easy application in relative air humidity up to 98%
• Tidal zones: entire system can be coated in 30 minutes incl. zinc primer – with immediate resistance to seawater
• Can be applied to slightly damp surfaces
• No dew point restrictions
• 1 component, so no waiting for reaction time
• No pot-life
• Long-life corrosion resistance – even when applied under harsh conditions
• Excellent adhesion of active zinc primer, even on mechanically or manually prepared surfaces and many old coats